Detailed Information

The Lube Pump is conveniently located under the engine hood where it draws transmission fluid from the automatic transmission pan then pumps the fluid to the automatic selector valve. This valve directs the fluid through the transmission cooler then to the automatic transmission's lubrication system which in essence, duplicates the automatic transmissions original fluid pump. The Lube Pump is controlled by the dash mounted electronic monitor that derives its power from the motorhomes battery (no power is drawn from the toad battery). The electronic monitor is mounted near the motorhome driver, has control indicators and an audible alarm that will alert the operator of any problems in the lubrication system including failure to turn the system on, or failure to connect the electrical cord between the car and motorhome - One coiled electrical cable between the motorhome and car provides all the circuits for the lube pump system, monitor and vehicle tail lights. The kit also includes 4 double feed diodes used to automatically convert the cars tail lights from drive mode to tow mode every time you plug-in. The Remco Lube Pump System has proven to be a safe and reliable product for towing your automatic front wheel drive (some rwd ) vehicle 4-wheels-down.

Custom designed to fit your vehicles specific transmission type. The Remco Lube Pump System was designed to take the heavy work and worry out of towing your vehicle 4-wheels-down...